cross-posted from: https://lemmy.world/post/54727975

From the display:

The Canadian Warplane Heritage Museum’s Nene-10 engine, serial number 1807, was one of 900 Nene-10’s purchased by the Canadian Forces for use in their fleet of T-33 Silver Stars. It was obtained in 1997 through the co-operation of the Canadian Forces and the Hamilton Air Force Association. Sectioning of the engine took over 500 hours and was carried out by Canadian Warplane Heritage members and volunteers at Liburdi Engineering Limited. Assistance was provided by Canadian Forces, Rolls-Royce Canada, Sermatech Canada, Mobile Cartage, Ontario Hydro, DoAll Industrial and Bochsler Photographics + Imaging.

The RB.41 Nene engine was designed in 1944 by Sir Stanley Hooker of Rolls-Royce following upon the pioneering efforts of the turbojet’s inventor Sir Frank Whittle.

Although it was too late to be used in the Second World War, the Nene was the first commercially available turbojet engine. Rated at 5000 pounds of thrust, in 1945 this was the world’s most powerful turbojet. Using a Whittle style certifugal compressor, the curved compressor inlet vanes improved efficiency while the double entry impeller reduced both the overall engine diameter and the load upon the thrust bearings. A ring of nine combustion cans received the compressed air into which kerosene fuel was injected and burnt. The combustion gases then expanded through a single stage turbine which powered the compressor (and the front mounted accessories via a gearbox). Lastly, the hot (1292°F) exhaust traveled through the jet pipe producing thrust. A small, centrally mounted impeller provided cooling air for the rear bearing and turbine disc. Nene engines were built under license in Australia, Canada, France, USAand the UK. Direct derivatives were produced by several USA manufacturers, while “bootleg” copies were made in communist Russia and China.